If your rubber plant is dying, don’t despair. There are several possible causes, and with a little investigation, you should be able to figure out what’s wrong and save your plant. Common causes of death in rubber plants include overwatering, underwatering, too much or too little light, and pests.
How to Know If a Rubber Plant is Dying
However, there are a few things you can do to save your plant. If your rubber plant is wilting, has yellow leaves, or is shedding leaves, it may be dying.
First, check the soil. If the soil is soggy, try to improve drainage by adding perlite or sand. If it is dry, water your plant.
Next, check for pests. If you see any insects, remove them and treat the plant with an insecticide.
If your plant has any fungal diseases, treat it with a fungicide. Finally, check for diseases.
If you have tried all of these things and your plant is still dying, it may be time to give up and start over with a new plant.
Unhealthy Leaves
One possibility is that the plant is not getting enough water. Another possibility is that the plant is getting too much water. If the leaves are wilted or drooping, this is a sign that the plant needs more water. Too much water can cause the roots to rot, so it’s important to be careful not to overwater your rubber plant. If the leaves are yellow or brown, this is a sign of overwatering. If you notice your rubber plant’s leaves are unhealthy, there are a few potential causes.
You can try to remove the pests by hand, or use an insecticide to get rid of them. Another potential cause of unhealthy leaves is pests. If you see any small insects on the leaves, they may be sucking the nutrients out of the plant.
You can try to fertilize the plant to see if this helps. If the leaves are yellow or brown, this could be a sign that the plant is not getting enough nitrogen, phosphorus, or potassium. Finally, the leaves may be unhealthy because of a lack of nutrients.
One possibility is that the plant is not getting enough water. Another possibility is that the plant is getting too much water. If the leaves are wilted or drooping, this is a sign that the plant needs more water. Too much water can cause the roots to rot, so it’s important to be careful not to overwater your rubber plant. If the leaves are yellow or brown, this is a sign of overwatering. If you notice your rubber plant’s leaves are unhealthy, there are a few potential causes.
You can try to remove the pests by hand, or use an insecticide to get rid of them. Another potential cause of unhealthy leaves is pests. If you see any small insects on the leaves, they may be sucking the nutrients out of the plant.
You can try to fertilize the plant to see if this helps. If the leaves are yellow or brown, this could be a sign that the plant is not getting enough nitrogen, phosphorus, or potassium. Finally, the leaves may be unhealthy because of a lack of nutrients.
Growth Problem
There are several possible causes of this problem, including insufficient light, too much water, or a lack of nutrients. If your rubber plant is dying, it’s likely due to a problem with its growth.
To fix this, move your plant to a brighter location. If it’s getting too much water, the roots will rot and the plant will die. To fix this, water your plant less often. If your rubber plant isn’t getting enough light, it will start to lose its leaves and eventually die.
To fix this, fertilize your plant regularly. With the proper care, your rubber plant will thrive and live for many years. If your rubber plant isn’t getting enough nutrients, it will also start to die.
Brown and Mushy Roots
There are a few possible causes for this, including overwatering, root rot, and pests. If you notice that your rubber plant’s roots are brown and mushy, it’s a sign that the plant is dying.
When a plant is overwatered, the roots can’t get the oxygen they need to survive, and they start to rot. If you think your plant is overwatered, stop watering it and let the soil dry out completely. Overwatering is the most common cause of brown and mushy roots. If the roots are still mushy, you can try repotting the plant in dry, well-draining soil.
Root rot is another common cause of brown and mushy roots. If you think your plant has root rot, you can try treating it with a fungicide. Root rot is caused by a fungus that attacks the roots and prevents them from getting the nutrients they need.
If your plant is infested with pests, they can damage the roots and prevent the plant from getting the nutrients it needs. Pests can also cause brown and mushy roots. If you think your plant has pests, you can try treating it with an insecticide.
Causes of Your Rubber Plant Dying
If your rubber plant is dying, it’s important to figure out the cause so you can take steps to save it. There are several possible reasons for a rubber plant to die, including:
If you let the soil dry out completely, the plant will start to wilt and eventually die. – Lack of water: Rubber plants need to be watered regularly, especially during the warmer months.
– Too much water: On the other hand, overwatering can also kill a rubber plant. If the roots are constantly wet, they will start to rot and the plant will die.
– Pests: Aphids, mealybugs, and scale are all common pests that can attack rubber plants. If left unchecked, they will eventually kill the plant.
If you notice any unusual symptoms, it’s best to consult with a plant expert to diagnose the problem. – Disease: There are a few diseases that can affect rubber plants, such as root rot and leaf spot.
If you think your rubber plant is dying, it’s important to take action quickly. By figuring out the cause and taking steps to correct it, you may be able to save your plant.
Overwatering
If you’re noticing that your rubber plant’s leaves are drooping, it’s likely that you’re overwatering it. Rubber plants are native to tropical climates and don’t need a lot of water to thrive. When you overwater a rubber plant, the roots can’t get the oxygen they need and the plant can start to die.
If you’re still having trouble, you can try repotting your plant in a pot with better drainage. You can also try to water your plant less often, or move it to a spot where it will get less water. If you think you’re overwatering your rubber plant, the best solution is to let the plant dry out completely before watering it again.
Overwatering is a common problem for rubber plants, but it’s easy to fix if you catch it early. By giving your plant a little less water, you can help it stay healthy and happy.
Solutions:
If your rubber plant is losing leaves, this may be due to too much direct sunlight or drafts. To solve this problem, move your plant to a location with indirect sunlight or away from any drafts. To solve this problem, fertilize your plant with a balanced fertilizer. If the leaves of your rubber plant are turning yellow, this is likely due to a nutrient deficiency. If your rubber plant is dying, there are a few potential causes and solutions. One common cause of death for rubber plants is root rot, which is caused by overwatering. To solve this problem, allow the plant to dry out completely between watering.
Underwatering
When rubber plants are not watered enough, the leaves will start to droop and turn yellow. One of the most common reasons why rubber plants die is due to underwatering. The plant will eventually die if it does not receive enough water. There are a few things that you can do to prevent your rubber plant from dying due to underwatering.
Rubber plants need to be watered about once a week, or when the soil is dry to the touch. If you are unsure whether or not your plant needs water, it is better to err on the side of caution and water it. First, make sure that you are watering your plant regularly.
Second, make sure that you are using the right type of soil. If your plant is in soil that does not drain well, the roots will start to rot and the plant will eventually die. Rubber plants do best in well-draining soil that is rich in organic matter.
If the plant is in direct sunlight, the leaves will start to scorch and the plant will eventually die. Rubber plants need bright, indirect light in order to thrive. Third, make sure that you are not placing your rubber plant in direct sunlight.
If you think that your plant is already starting to die from underwatering, there are a few things that you can do to try and save it. If you follow these tips, you should be able to prevent your rubber plant from dying due to underwatering.
This will give the plant a chance to recover from the stress of being underwatered. First, water the plant thoroughly and then place it in a shady spot.
This will give the plant a chance to start growing in healthy soil. Second, you can try to repot the plant in fresh, well-draining soil.
Third, you can try to fertilize the plant. This will help the plant to get the nutrients that it needs in order to recover from being underwatered.
If you follow these tips, you should be able to save your rubber plant from dying due to underwatering.
Solutions:
If you think your plant is suffering from a pest infestation, inspect the leaves and stems for signs of insects. If the leaves are turning brown and crispy, this could be a sign of too little humidity. If you see any, you can try wiping them off with a damp cloth or spraying the plant with an insecticidal soap. Try misting the plant with water or placing it on a pebble tray. If your rubber plant is dying, there are a few potential causes and solutions. Make sure to water your rubber plant regularly, and check the soil to make sure it is moist but not soggy. If the leaves are turning yellow, this could be a sign of too much direct sunlight, so you may need to adjust the plant’s location. Move it to a brighter spot in your home or office. One common problem is that the plant is not getting enough water. Another potential problem is that the plant is not getting enough light.
Poor Drainage
To fix this, you can either repot your plant into a pot with better drainage or improve the drainage of your existing pot by adding a layer of gravel or rocks to the bottom. When rubber plants are grown in containers, they need to be well-drained to prevent root rot. If your plant is in a pot with poor drainage, it’s likely that the roots are sitting in water, which is causing them to rot. If your rubber plant is dying, it could be due to poor drainage.
To fix this, you can either add some perlite or vermiculite to the mix to improve drainage or repot your plant into a lighter mix. Another reason for poor drainage could be that the potting mix you’re using is too dense. If the mix is too dense, water can’t move through it easily and will pool at the bottom of the pot, causing the roots to rot.
If you suspect that poor drainage is to blame for your rubber plant’s death, you can take steps to improve the drainage of your plant and save it from further damage.
Solutions:
There are a few things you can do to revive your rubber plant and get it back to good health. These plants are notoriously difficult to care for, and even experienced gardeners can find themselves at a loss when their rubber plants start to die. If you’re struggling to keep your rubber plant alive, you’re not alone. But don’t despair!
If it’s still dry, water again. Rubber plants are native to tropical climates and prefer to be kept moist. However, they are also susceptible to root rot, so it’s important to not over-water them. Repeat this process until the soil is evenly moist but not soggy. If the soil is dry to the touch, water the plant and then check the soil again in a few hours. First, check the plant’s watering schedule.
Next, take a look at the plant’s light exposure. If your plant is in a dark corner or isn’t getting enough light, it will start to die. Rubber plants need bright, indirect light to thrive. Move it to a brighter spot and see if that makes a difference.
If you see any pests on your plant, treat them immediately with an insecticide. Mealybugs, scale, and spider mites are all common pests that can attack rubber plants. Finally, check for pests.
With a little care and attention, you can get your rubber plant back to good health in no time!
Not Enough Sunlight
If your rubber plant is dying, it’s likely because it’s not getting enough sunlight. If not, you may need to give it some artificial light. Rubber plants need bright, indirect light to thrive, so if yours is in a dark corner or near a window, it’s not getting enough light. Move it to a brighter spot and see if that helps.
If you think your plant is getting enough light but it’s still dying, check for other possible causes, like too much or too little water, pests, or disease. There are a few other things that can cause a rubber plant to die, but not getting enough sunlight is the most common.
Solutions:
If your rubber plant is dying, there are a few possible causes and solutions. One common cause is too much or too little water. If you think your plant is getting too much water, try letting the soil dry out a bit before watering again. If you think it’s not getting enough water, try watering it more often.
Another common cause of death for rubber plants is too much or too little light. If your plant is getting too much light, try moving it to a shadier spot. If it’s not getting enough light, try moving it to a brighter spot.
If you think your plant needs more fertilizer, try using a fertilizer made specifically for rubber plants. Finally, rubber plants can also die if they’re not getting the right kind of fertilizer.
Pathogenic Infection
Pathogenic infections are caused by pathogens, which are microorganisms that can cause disease. These pathogens can enter the plant through wounds or cracks in the bark, and they can spread quickly through the plant, causing the leaves to turn yellow and die. If you think your rubber plant has a pathogenic infection, the best course of action is to remove the affected leaves and stems, and to disinfect the plant with a solution of bleach and water. The most common pathogens that infect rubber plants are bacteria and fungi. If your rubber plant is dying, it’s likely due to pathogenic infection.
Solutions:
If the plant is still alive, you can try to save it by replanting it in fresh, dry soil. If you think your plant may have root rot, the first solution is to stop watering it and let the soil dry out completely. One common cause of death for rubber plants is root rot, which is caused by overwatering. If your rubber plant is dying, there are a few potential causes and solutions.
Another common cause of death for rubber plants is leaf spot, which is caused by a fungal infection. You can also try spraying the plant with a fungicide, but this is not always effective. If you see leaf spot on your plant, the best solution is to remove the affected leaves and destroy them.
If the plant is still alive, you can try to save it by replanting it in fresh, dry soil. If you think your plant may have root rot, the first solution is to stop watering it and let the soil dry out completely. One common cause of death for rubber plants is root rot, which is caused by overwatering. If your rubber plant is dying, there are a few potential causes and solutions.
Another common cause of death for rubber plants is leaf spot, which is caused by a fungal infection. You can also try spraying the plant with a fungicide, but this is not always effective. If you see leaf spot on your plant, the best solution is to remove the affected leaves and destroy them.
If the plant is still alive, you can try to save it by replanting it in fresh, dry soil. If you think your plant may have root rot, the first solution is to stop watering it and let the soil dry out completely. One common cause of death for rubber plants is root rot, which is caused by overwatering. If your rubber plant is dying, there are a few potential causes and solutions.
Another common cause of death for rubber plants is leaf spot, which is caused by a fungal infection. You can also try spraying the plant with a fungicide, but this is not always effective. If you see leaf spot on your plant, the best solution is to remove the affected leaves and destroy them.
Bacterial Soft Rot
The leaves of a rubber plant with bacterial soft rot will turn yellow and fall off, and the stem will become soft and mushy. Bacterial soft rot is a common problem for rubber plants. Once the bacteria are inside the plant, they release enzymes that break down the plant’s cell walls, causing the plant to collapse. The bacteria that cause this disease are often found in the soil, and can infect the plant through wounds or damaged roots.
Second, avoid wounding the plant, as this can provide an entry point for the bacteria. If the soil is too wet, the bacteria can more easily infect the plant. Finally, if you do notice any signs of bacterial soft rot, remove the affected parts of the plant immediately and dispose of them in the trash. There are several things you can do to prevent bacterial soft rot from infecting your rubber plant. First, make sure to plant your rubber plant in well-draining soil.
Solutions:
If your rubber plant is dying, there are a few possible solutions. If you find any, treat them accordingly. Second, make sure the plant is getting enough light. Finally, check the temperature. If it’s not, move it to a brighter spot. First, check the plant for pests and diseases. Third, check the soil for moisture. If the soil is too dry, water the plant. If the plant is in a too-cold or too-hot environment, move it to a more moderate location. By following these steps, you should be able to revive your rubber plant.
Pest Infestation
These pests can suck the sap out of your plant, causing it to become weak and unhealthy. Common culprits include aphids, mealybugs, scale insects, and spider mites. If you notice your rubber plant’s leaves turning yellow, wilting, or developing brown spots, it may be due to a pest infestation.
Then, treat your plant with an insecticidal soap or neem oil. Be sure to follow the instructions on the label carefully. You may need to treat your plant several times to get rid of all the pests. To get rid of pests, start by spraying your plant with water to dislodge them.
Prevent pests from coming back by keeping your plant healthy and stress-free. Avoid overwatering, which can make your plant more susceptible to pests. Keep your plant in a well-ventilated area, and check it regularly for signs of pests.
Solutions:
If your plant is getting enough light, water, and nutrients, and is still dying, it may be time to consult a professional. Another potential problem is pests, which can be controlled with regular spraying of insecticidal soap. If the roots are still mushy, you can try replanting in fresh, dry soil. If your rubber plant is dying, there are a few potential causes and solutions. One common reason for a rubber plant’s demise is root rot, which is caused by too much water. If you think your plant may have root rot, the first solution is to let the plant dry out completely.
Incorrect Soil pH
If the pH is too low, it can cause the plant to become stunted and produce fewer leaves. The ideal pH for rubber plants is 6.0-6.5, but they can tolerate a range of 5.5-7.0. You can also amend the soil with lime or sulfur to adjust the pH. If you think the pH of your soil might be the problem, you can test it with a soil test kit. If your rubber plant is dying, it could be because of incorrect soil pH. If the pH is outside of this range, it can cause problems for the plant. If the pH is too high, it can cause the plant to become yellow and produce fewer leaves.
Solutions:
If it’s not getting enough light, try moving it to a sunnier spot. If you think it’s not getting enough water, water it more often. If your rubber plant is dying, there are a few possible causes and solutions. If you think your plant is getting too much water, try letting the soil dry out more between waterings. Finally, another possible cause of death is pests. If you think your plant has pests, try spraying it with an insecticidal soap or bringing it to a plant doctor for treatment. If your plant is getting too much light, try moving it to a shadier spot. One common cause is too much or too little water. Another possible cause is too much or too little light.
Low Temperature
If you notice that your rubber plant’s leaves are drooping and turning yellow, it’s likely that the plant is not getting enough water. Rubber plants are native to tropical climates and prefer warm, humid conditions. If the air in your home is too dry, the plant will suffer.
To solve this problem, try misting the plant with water every day or setting it on a pebble tray filled with water. You can also increase the humidity in your home by using a humidifier.
If you think that your rubber plant is not getting enough water, check the soil first to see if it is dry. If the soil is dry again, the plant needs more water. If the soil is dry, water the plant thoroughly and then check the soil again in a few hours to see if it is still dry.
Solution:
If you think you may be guilty of overwatering your rubber plant, the solution is simple: cut back on the water. Let the soil dry out completely between watering, and don’t water your plant more than once a week. If your rubber plant is dying, there are a few potential causes and solutions. One common reason for a rubber plant’s demise is overwatering. When rubber plants are overwatered, their leaves begin to yellow and drop off.
If you think your rubber plant is not getting enough light, move it to a brighter spot. If your plant is not getting enough light, its leaves will begin to turn yellow and it will eventually die. Rubber plants need bright, indirect light to thrive. Another potential cause of a dying rubber plant is insufficient light.
If you see any pests on your plant, you can try to remove them by hand. Finally, rubber plants can also die if they are infested with pests. Common pests that attack rubber plants include mealybugs, aphids, and scale. If the infestation is severe, you may need to use a pesticide.
Low Humidity
The evaporation from the water will help to raise the humidity around your plant. Rubber plants need high humidity to thrive, so if the air in your home is too dry, your plant will suffer. Finally, make sure you are not placing your plant in a drafty spot, as this can also cause the plant to suffer. First, try misting your plant daily with water. If your rubber plant is dying, it could be due to low humidity. There are a few things you can do to raise the humidity around your rubber plant. By taking these steps, you can help your rubber plant to thrive. You can also place your plant on a pebble tray filled with water.
Solutions:
One common cause of death for rubber plants is root rot, which can be caused by overwatering or poor drainage. Another common cause of death for rubber plants is lack of sunlight. If you cannot provide enough natural light, you may need to supplement with artificial light. Finally, pests can also cause your rubber plant to die. If you see pests on your plant, try to remove them with a cotton swab dipped in rubbing alcohol. If the infestation is severe, you may need to treat your plant with an insecticide. If your rubber plant is dying, there are a few potential causes and solutions. If your plant is not getting enough sunlight, try moving it to a brighter location. If you suspect your plant has root rot, you can try to save it by removing it from the pot and replanting it in fresh, well-draining soil.
Watering in Dormant Period
However, during the dormant period, the plant doesn’t need as much water. When a rubber plant is actively growing, it needs to be watered frequently. In fact, too much water can actually harm the plant.
Once every two weeks should be sufficient. If you’re not sure how often to water your rubber plant during the dormant period, err on the side of caution and water it less often than you would during the growing season.
Give it a good watering, and it should recover quickly. If you notice that your rubber plant is starting to wilt or its leaves are drooping, that’s a sign that it needs more water.
Solutions:
Finally, another common cause of death for rubber plants is insufficient light. One common cause of death for rubber plants is root rot, which can be caused by overwatering or poor drainage. If you see any pests on your plant, you can try to remove them by hand or with a pesticide. Another common cause of death for rubber plants is pests, such as mealybugs, scale, or spider mites. If your rubber plant is dying, there are a few potential causes and solutions. If your plant is not getting enough light, you can try moving it to a brighter spot or adding a grow light. If you suspect your plant has root rot, you can try to save it by replanting in fresh, well-draining soil and cutting back on watering.
Root Bound
If your rubber plant is dying, it’s likely due to being root bound. This can happen if the plant is pot-bound, meaning the pot is too small for the plant, or if the roots have become entangled. Root bound occurs when a plant’s roots have become so tightly packed that they can’t adequately absorb water and nutrients.
You may need to trim some of the roots to get them back into shape. To fix a root bound plant, you’ll need to carefully remove it from its pot and loosen the roots. Once the roots have been loosened, you can replant the rubber plant in a larger pot with fresh soil.
Solutions:
If your rubber plant is dying from pests, you can try to remove the pests by hand or treat the plant with an insecticide. If your rubber plant is dying, there are a few potential causes and solutions. To fix this, you can replant your rubber plant in a pot with better drainage and water it less often. If it’s not getting enough sun, you can move it to a sunnier location. If your plant is dying from too much sun exposure, you can move it to a shadier spot. One common cause of death for rubber plants is root rot, which is caused by too much water and not enough drainage.
How to Fix Your Dying Rubber Plant
If the soil is too wet, try to improve drainage by adding sand or perlite. If it is, water the plant thoroughly. If the plant is in a pot, make sure there is a drainage hole. If your rubber plant is dying, there are a few things you can do to try to save it. First, check the soil to see if it is dry.
Next, check for pests. Be sure to follow the instructions on the pesticide label. If you see any insects, remove them by hand or with a pesticide.
Again, be sure to follow the instructions on the label. Finally, check the plant for diseases. If you see any signs of disease, such as mold or mildew, treat the plant with a fungicide.
With a little care, you can often revive a dying rubber plant.
Repotting
This is necessary every few years as your plant grows. If your rubber plant is dying, it might be time for a repot. Repotting is when you transfer your plant to a new, larger pot. It is a good idea to do this in the springtime.
Here are some tips for repotting your rubber plant:
-Choose a pot that is about 2-3 inches wider than the current pot.
-Fill the new pot with fresh potting mix.
-Carefully remove the plant from the old pot, being careful not to damage the roots.
-Place the plant in the new pot and fill in around it with potting mix.
-Water the plant well.
After repotting, your rubber plant should start to look healthier. Check for pests or diseases and consult a plant expert if necessary. If it doesn’t, there might be another problem.
Propagation
If you’re wondering why your rubber plant is dying, it could be due to a number of reasons. Too much water can cause the roots to rot, so it’s important to let the soil dry out between watering. If the leaves are yellow or drooping, this could be a sign that you’re giving it too much water. One possibility is that you’re not watering it enough. Another possibility is that you’re overwatering your plant. Rubber plants need to be watered about once a week, and if the soil is dry to the touch, it’s time to water.
If you think you might be overwatering your rubber plant, try to let the soil dry out more between watering. And if you’re not sure how often to water, err on the side of less water rather than more. Too much water is more likely to kill a rubber plant than too little water.
How to Prevent Rubber Plant from Dying
If you’re noticing your rubber plant dying, it’s important to take action immediately to save it. There are a few things that could be causing the problem, but with a little care and attention, you can get your plant back to good health.
If the soil is constantly dry, the plant will start to wilt and the leaves will turn brown. On the other hand, if the soil is too wet, the roots will start to rot. One of the most common reasons for a rubber plant to die is because of too much or too little water. To prevent this, make sure you’re watering your plant regularly and allowing the soil to dry out in between waterings.
Move your plant to a brighter spot and make sure to rotate it regularly so that all sides get an equal amount of light. This plant prefers bright, indirect sunlight. If it’s not getting enough light, the leaves will start to turn yellow. If your rubber plant is dying, it’s also important to check the light levels.
If you see small insects on the leaves or in the soil, treat the plant with an insecticide. Also, be sure to check for mealybugs, which are small, white pests that can suck the nutrients out of the plant. Finally, pests can also be a problem for rubber plants. If you see any of these, you’ll need to take action to get rid of them.
With a little TLC, your plant will be back to good health in no time. Be sure to water it regularly, give it bright light, and watch out for pests. With a little care and attention, you can prevent your rubber plant from dying.
Final Words
If your rubber plant is dying, don’t despair. There are a number of possible causes and solutions.
One common cause of death for rubber plants is root rot. This can be caused by overwatering or by planting the plant in a pot that is too small. If you think your plant may have root rot, try replanting it in a larger pot with fresh soil.
Rubber plants need bright, indirect sunlight to thrive. If your plant is not getting enough light, try moving it to a brighter spot. Another common cause of death for rubber plants is lack of sunlight.
A certified arborist or horticulturist will be able to diagnose the problem and recommend a solution. If you’re still not sure what’s causing your rubber plant to die, consult a professional.
Frequently Asked Questions
1. Why is my rubber plant dying?
There could be a number of reasons why your rubber plant is dying. It could be due to too much or too little water, too much or too little sunlight, or a pests or disease.
2. How can I tell if my rubber plant is getting too much or too little water?
If your rubber plant is getting too much water, the leaves will start to yellow and drop off. If it’s getting too little water, the leaves will start to brown and dry out.
3. How can I tell if my rubber plant is getting too much or too little sunlight?
If your rubber plant is getting too much sunlight, the leaves will start to turn yellow or brown. If it’s getting too little sunlight, the leaves will start to turn pale green or yellow.
4. What kind of pests or diseases can affect my rubber plant?
There are a number of pests and diseases that can affect your rubber plant. These include mealybugs, spider mites, scale, root rot, and leaf spot.
5. What are some solutions to these problems?
Some solutions to these problems include watering your rubber plant regularly, giving it the right amount of sunlight, and using the appropriate pesticides or fungicides.
Final thoughts
If your rubber plant is dying, it could be due to a number of reasons. It could be because of too much or too little water, too much or too little light, or a pest infestation. However, with a little bit of care and attention, you can revive your rubber plant and keep it healthy for years to come.