One possible reason for rubber plant leaves drooping is that the plant is not getting enough water.

Rubber Plant Leaves Drooping (Causes And Solutions)

PLANT CLINIC / By

If you have a rubber plant and its leaves are drooping, you may be wondering what the problem is. There are several possible causes, including too much or too little water, too much or too little light, or pests. But don’t worry, there are solutions for each of these problems.

Causes of Rubber Plant Leaves Drooping

If the leaves are wilting and drooping, check the soil to see if it is dry. If it is, water the plant thoroughly. One common reason for rubber plant leaves drooping is that the plant is not getting enough water. Another possible reason for drooping leaves is that the plant is getting too much sun. If the leaves are yellow or brown and drooping, move the plant to a spot that gets less sunlight.

One possible reason for rubber plant leaves drooping is that the plant is not getting enough water.
One possible reason for rubber plant leaves drooping is that the plant is not getting enough water.

If you see any, treat the plant accordingly. If you suspect that pests or diseases are to blame, inspect the plant carefully and look for signs of pests or disease. If you think a nutrient deficiency might be the problem, fertilize the plant with a balanced fertilizer. Other causes of drooping leaves on rubber plants can include pests, diseases, and nutrient deficiencies.

Temperature Too Low

This is because the leaves are not getting enough sunlight and the plant is not able to photosynthesize. The solution is to move the plant to a warmer location or to provide it with artificial light. If the temperature is too low, your rubber plant leaves may droop.

Solution

If your rubber plant’s leaves are drooping, it could be due to a number of reasons. Most often, it is simply because the plant is not getting enough water. Another possible reason for drooping leaves is that the plant is not getting enough light. Make sure to water your rubber plant regularly, and if the leaves are still drooping, try giving it a little extra water. Move it to a spot where it will get more light, and the leaves should perk up. Treat the plant with a fungicide, and if the problem persists, you may need to get rid of the plant. If the leaves are drooping and there are brown spots on them, it could be a sign of a fungal infection.

Cold Air Is Damaging

When temperatures drop, many plants suffer. One of the most common problems is leaf drooping. While this can be caused by a number of factors, one of the most common is cold damage.

This damage can lead to leaf drooping, as well as other problems such as leaf browning and wilting. When leaves are exposed to cold air, they can suffer damage. This is because the cells in the leaves freeze, causing them to rupture.

Fortunately, there are a few things you can do to help prevent cold damage to your plants. This will help to reduce the risk of cell damage. Second, try to protect them from the cold as much as possible. First, make sure they are well-watered before the cold sets in. This can be done by covering them with a cloth or placing them in a sheltered spot.

One possible reason for your rubber plant's leaves drooping is that the air is too cold.
One possible reason for your rubber plant’s leaves drooping is that the air is too cold.

By taking these steps, you can help to ensure that your plants survive the cold weather.

Solution

If your rubber plant’s leaves are drooping, it could be due to a number of reasons. If the leaves are yellow or brown, it could be a sign of too much direct sunlight. Another possibility is that the plant is not getting enough light. If the leaves are wilted and drooping, but the stem is still firm, it’s likely that the plant just needs to be watered. The most common cause is overwatering, which can lead to root rot.

One possible solution is to increase the humidity around the plant by setting it on a pebble tray or grouping it with other plants.
One possible solution is to increase the humidity around the plant by setting it on a pebble tray or grouping it with other plants.

If you think overwatering is the problem, the solution is to let the soil dry out completely before watering again. If the plant is not getting enough light, move it to a brighter spot. If the leaves are wilted and drooping, but the stem is still firm, water the plant immediately. If the leaves are yellow or brown, try shading the plant from direct sunlight.

Heat Stress Cause Rubber Leaves Drooping

The best way to prevent this is to make sure that the plant is not in direct sunlight and is not in a room that is too warm. One of the most common reasons that rubber plants droop is due to heat stress. If the plant is in a pot, you can also try moving it to a cooler location. If the plant is exposed to too much heat, the leaves will start to droop and eventually fall off.

One possible cause of rubber leaves drooping is heat stress.
One possible cause of rubber leaves drooping is heat stress.

Another reason that rubber plants droop is due to lack of water. If the plant is not getting enough water, the leaves will start to droop and the plant will eventually die. If the plant is in a pot, you can also try using a humidity tray to help keep the soil moist. The best way to prevent this is to water the plant regularly and make sure that the soil is always moist.

If the plant is exposed to too much heat or light, you can try moving it to a cooler location. If you notice that your rubber plant is drooping, the best thing to do is to try to identify the cause. If the plant is not getting enough water, you can try watering it more often. If you can’t identify the cause, you can try using a plant food or fertilizer to help the plant recover.

Solution

If your rubber plant’s leaves are drooping, it could be due to a number of reasons. Most often, it is simply because the plant is not getting enough water. If the soil is still moist, wait a few days before watering again. Make sure to water your rubber plant regularly, and check the soil to see if it is dry before watering.

One potential solution is to check the root ball of the plant.
One potential solution is to check the root ball of the plant.

Another possible reason for drooping leaves is that the plant is not getting enough light. Rubber plants need bright, indirect light to thrive. If your plant is in a low-light area, move it to a brighter spot. If the leaves are still drooping, you may need to increase the amount of light gradually to avoid shocking the plant.

If the leaves are still drooping, you can try misting the plant with warm water to raise the temperature around it. These tropical plants prefer warm temperatures, so if your home is on the cooler side, try moving the plant to a warmer spot. Finally, rubber plants may droop if they are too cold.

Insufficient Humidity

The leaves of the plant will start to droop and the plant will become less vigorous. The best way to increase the humidity around your rubber plant is to mist it regularly or use a humidifier. If the air in your home is very dry, you may also want to place the plant on a pebble tray. One of the most common problems with rubber plants is insufficient humidity.

Excessive Humidity

Rubber plants thrive in humid conditions, but too much humidity can cause the leaves to droop. If the leaves are severely drooped, it’s best to remove the plant from the humid environment. If you notice your rubber plant’s leaves drooping, it could be a sign that the air is too humid. If the leaves are only slightly drooping, you can try increasing the humidity in the room.

Lack of Nutrients in the Soil Causes Drooping

Use a balanced fertilizer that contains nitrogen, phosphorus, and potassium. If your rubber plant’s leaves are drooping, it could be a sign that the soil is lacking in nutrients. Apply the fertilizer according to the package directions, and be sure to water the plant well after fertilizing. To solve this problem, you’ll need to fertilize your rubber plant regularly. With regular fertilization, your rubber plant should soon start to look healthy and vibrant again. This is a common problem with houseplants, as the soil in pots and planters can quickly become depleted of nutrients.

Solution

If you notice your rubber plant’s leaves drooping, it’s important to take action quickly to save your plant. If the soil is soggy or waterlogged, it’s time to let your plant dry out. Be sure to empty any water that’s collected in the plant’s saucer, and don’t water your plant again until the top inch of soil is dry. If you’re unsure whether you’re overwatering your plant, it’s better to err on the side of caution and wait a bit longer before watering again. The most common cause of drooping leaves is overwatering, so the first step is to check your plant’s soil.

If your rubber plant leaves are drooping, it is likely due to one of three reasons: too much sun, not enough water, or pests.
If your rubber plant leaves are drooping, it is likely due to one of three reasons: too much sun, not enough water, or pests.

Other causes of drooping leaves can include low humidity, too much direct sunlight, or a lack of nutrients. With a little trial and error, you should be able to figure out what your plant needs to stay healthy and happy. If you think one of these may be the problem, try moving your plant to a different location or adjusting your watering and fertilizing schedule.

Lack of Water Leads to Wilting

If you notice your rubber plant’s leaves drooping, it’s likely a sign that the plant is thirsty. Lack of water is the most common reason for rubber plants to wilt.

If your rubber plant's leaves are drooping, it is likely due to a lack of water.
If your rubber plant’s leaves are drooping, it is likely due to a lack of water.

When rubber plants don’t get enough water, their leaves start to droop and eventually turn brown and crispy. If you catch the problem early enough, you can usually save your plant by giving it a good watering.

Allow the soil to dry out slightly between waterings. To avoid your rubber plant from suffering from lack of water, make sure to water it regularly. If you live in a particularly dry climate, you may need to water your plant more often.

Then, repot the plant in fresh, dry soil. If you think your rubber plant is getting too much water, look for signs of root rot, such as yellowing leaves or mushy stems. If you think your plant has root rot, stop watering it and let the soil dry out completely. Root rot is a serious problem that can kill your plant.

Solution

If your rubber plant’s leaves are drooping, it’s a sign that something is wrong. When a plant is overwatered, the roots can’t get the oxygen they need to function properly, and the plant starts to suffocate. Let the soil dry out completely between waterings, and don’t water the plant at all if the leaves are already drooping. If you think you’ve been overwatering your rubber plant, the solution is simple: stop watering it so much! The most common cause of drooping leaves is overwatering.

If your plant is in a sunny spot, try moving it to a shadier location. Other causes of drooping leaves include too much sun, too much fertilizer, or pests. If you’ve been fertilizing your plant, cut back on the amount of fertilizer you’re using. And if you see pests on the leaves, treat the plant with an insecticide.

If your rubber plant's leaves are drooping, it is likely due to one of several common causes. Fortunately, there are a few simple solutions that can help.
If your rubber plant’s leaves are drooping, it is likely due to one of several common causes. Fortunately, there are a few simple solutions that can help.

If the leaves start to perk up, you know you were overwatering. If you can’t figure out what’s causing your rubber plant’s leaves to droop, try giving it a good watering and then letting the soil dry out completely. If the leaves stay droopy, something else is to blame.

Waterlogging is a Plant Killer

If you see your plant’s leaves drooping, it could be a sign of waterlogging. Waterlogging is a plant killer. To prevent waterlogging, make sure your plant’s pot has drainage holes and that you’re not over-watering it. It can cause root rot, which can kill a plant.

Solution

But don’t worry, there are solutions for each problem! If your rubber plant’s leaves are drooping, it could be due to a variety of reasons.

If your rubber plant's leaves are drooping, it is likely due to one of these three causes: too much sun, not enough water, or pests.
If your rubber plant’s leaves are drooping, it is likely due to one of these three causes: too much sun, not enough water, or pests.

One common reason for drooping leaves is that the plant is not getting enough water. Make sure to water your rubber plant regularly, and if the leaves are still drooping, try giving it a deep watering.

If the leaves are turning yellow or brown, it’s a sign that the plant is getting too much direct sunlight. Move it to a spot with indirect light, and the leaves should start to perk up. Another possible reason is that the plant is getting too much sun.

Allow the soil to dry out completely before watering again. If the leaves are drooping and the stems are soft, it could be a sign of over-watering. And make sure the pot has drainage holes so the water can drain out properly.

With a little TLC, your plant will be back to its healthy self in no time! If you’re still having trouble, consult a plant expert or bring your rubber plant to a local nursery for help.

Light Levels Wrong

Rubber plants need bright, indirect light to thrive, so if your plant is in a low-light spot, it’s no wonder its leaves are drooping. If your rubber plant’s leaves are drooping, it could be a sign that the light levels in your home are wrong.

One possible reason for your rubber plant's leaves drooping is that the light levels are wrong.
One possible reason for your rubber plant’s leaves drooping is that the light levels are wrong.

If your home doesn’t have a lot of natural light, you may need to supplement with artificial light. To fix the problem, move your rubber plant to a brighter spot in your home. If possible, place it near a window where it can get plenty of indirect sunlight. Place your rubber plant under a grow light for 12-14 hours a day to give it the light it needs to thrive.

Solution

Luckily, all of these problems have easy solutions. If your rubber plant’s leaves are drooping, it’s likely due to one of three reasons: too much sun, too little water, or too much fertilizer.

One possible solution is to water the plant with room-temperature water, giving it a thorough soaking until water runs out of the drainage holes.
One possible solution is to water the plant with room-temperature water, giving it a thorough soaking until water runs out of the drainage holes.

If it’s not getting enough water, water it more frequently. And if you think you’re over-fertilizing, cut back on the fertilizer. If your plant is getting too much sun, simply move it to a spot that gets less light.

With a little trial and error, you should be able to find the perfect spot for your rubber plant. And once you do, it will thrive and its leaves will be perky and green.

Becoming Pot-Bound

Pot-bound is when a plant’s roots have become so tightly bound in the pot that they can no longer take in enough water and nutrients. This can happen for a number of reasons, including using a pot that’s too small or not repotting the plant often enough. If your rubber plant’s leaves are drooping, it’s likely due to a condition called “pot-bound.”

There are a few things you can do to fix a pot-bound plant. If that doesn’t work, you may need to repot the plant into a larger pot. This will help the roots take in more water and hopefully alleviate some of the stress they’re under. Be sure to use a potting mix that’s well-draining to avoid further problems. First, try watering it more frequently.

One possible reason for your rubber plant's leaves drooping is that it is pot-bound, meaning the roots have become too crowded in the pot and are unable to take in enough water and nutrients.
One possible reason for your rubber plant’s leaves drooping is that it is pot-bound, meaning the roots have become too crowded in the pot and are unable to take in enough water and nutrients.

With a little care, you can get your pot-bound plant back to good health in no time.

Solution

If your rubber plant’s leaves are drooping, it could be due to a number of reasons. If you think your plant is getting too much water, let the soil dry out before watering again. If you think your plant is getting too little water, water it more frequently. Most often, drooping leaves are caused by too much or too little water.

One possible solution is to increase the humidity around the plant by misting the leaves or setting the plant on a pebble tray.
One possible solution is to increase the humidity around the plant by misting the leaves or setting the plant on a pebble tray.

Another common cause of drooping leaves is low humidity. If your home is particularly dry, try misting your plant’s leaves or setting it on a pebble tray.

Finally, if your plant is getting enough water and humidity but its leaves are still drooping, it could be a sign of root rot. If you think your plant has root rot, replant it in fresh, well-draining soil.

Transplant Shock

The plant may also be stressed from being in a new environment or from being pot-bound. This occurs when the plant is moved from one location to another and the roots are disturbed. Transplant shock can cause the leaves to droop and the plant to lose its vigor. One of the most common problems with rubber plants is transplant shock.

First, make sure that the plant is in a well-lit location but out of direct sunlight. Third, fertilize the plant with a balanced fertilizer. There are a few things that can be done to help a rubber plant recover from transplant shock. Second, water the plant regularly but do not over-water. fourth, if the leaves are drooping, you can try to gently coax them back up with your fingers.

One possible cause of your rubber plant's leaves drooping is transplant shock.
One possible cause of your rubber plant’s leaves drooping is transplant shock.

With a little care, your rubber plant should recover from transplant shock and be back to its normal self in no time.

Solution

If your rubber plant’s leaves are drooping, it could be due to a number of reasons. Most often, it is simply because the plant is not getting enough water. If the leaves are still drooping after you’ve watered the plant, it could be because the plant is not getting enough light. Make sure to water your rubber plant regularly and deeply, so that the water can reach the roots. This means that the roots have outgrown the pot and need to be transplanted into a larger one. Lastly, if the leaves are drooping and the plant is not rootbound, it could be because the plant is stressed. If the leaves are drooping and the plant is getting enough water and light, it could be because the plant is rootbound. This can happen if the plant is moved to a new location, or if the temperature or humidity changes suddenly. Move it to a brighter spot, and if possible, give it some direct sunlight. To help reduce stress, try to keep the plant in a consistent environment.

Pests Infestation

These pests can cause the leaves of the plant to turn yellow, brown, or black, and can eventually cause the leaves to drop off. If you notice any of these symptoms on your rubber plant, it is important to take action immediately to control the pests and save the plant. Pests infestation is one of the most common problems that can cause rubber plant leaves to droop. There are a number of different pests that can infest rubber plants, including aphids, scale insects, and mealybugs.

However, these products should only be used as a last resort, as they can be harmful to humans and animals. These products will kill the pests on contact and can be used safely on most plants. One of the most effective methods is to use an insecticidal soap or horticultural oil. If you have a severe infestation, you may need to use a stronger insecticide, such as carbaryl or pyrethrin. There are a number of different ways to control pests on rubber plants. Another option is to use a product containing neem oil, which is a natural insecticide that is safe for use on food crops.

One possible reason for your rubber plant's leaves drooping is pests infestation.
One possible reason for your rubber plant’s leaves drooping is pests infestation.

You should also avoid using any chemicals or pesticides on your rubber plant, as this can make it more susceptible to infestation. This will help the plant to stay healthy and strong, which will make it less likely to be attacked by pests. One of the best ways to do this is to keep your rubber plant well-watered and fertilized. Once you have controlled the pests, it is important to take steps to prevent them from returning.

Scale Insects

Scale insects are one of the most common problems that houseplant owners face. These tiny pests attach themselves to the leaves or stems of plants and suck out the sap, causing the leaves to droop and the plant to become unhealthy. There are a number of different ways to get rid of scale insects, but the most important thing is to catch them early and take action to prevent them from coming back.

Solution

Luckily, there are a few simple solutions that can help revive your plant and get it back to its healthy self. If your rubber plant’s leaves are drooping, it could be caused by a variety of factors, including too much or too little water, too much or too little light, or even a lack of nutrients.

One possible solution is to increase the humidity around the plant by placing it on a pebble tray or grouping it with other plants.
One possible solution is to increase the humidity around the plant by placing it on a pebble tray or grouping it with other plants.

If your plant is drooping due to too much water, the first thing you’ll want to do is allow the soil to dry out completely. Once the soil is dry, you can resume watering as normal, making sure to not overwater in the future. If your plant is drooping due to too little water, simply water it more frequently, making sure to not let the soil dry out completely.

If it’s in too much light, move it to a shadier spot, and if it’s in too little light, move it to a sunnier spot. If your plant is drooping due to too much or too little light, you’ll need to adjust its location. If your plant is drooping due to a lack of nutrients, you can fertilize it with a balanced fertilizer.

Mealy Bugs

They can also cause stunted growth and flower bud drop. Mealybugs are most active in warm, humid weather. Mealybugs can cause leaves to droop and turn yellow. They are small, white, wingless insects that feed on plant sap. Mealybugs are one of the most common houseplant pests.

Mealybugs are one of the most common houseplant pests, and they can cause your rubber plant's leaves to droop.
Mealybugs are one of the most common houseplant pests, and they can cause your rubber plant’s leaves to droop.

You can also use an insecticidal soap or neem oil to kill them. Be sure to follow the instructions on the label carefully. The best way to control mealybugs is to remove them by hand. Mealybugs are difficult to control because they reproduce quickly and they hide in crevices on the plant.

Solution

Here are a few possible solutions: If your rubber plant leaves are drooping, it could be due to a number of reasons.

Stick your finger into the soil to check the moisture level. Check the soil moisture. The leaves of a rubber plant will droop if the soil is too dry. If the soil is dry, water your plant. 1.

Check the light level. Rubber plants need bright, indirect light. If the leaves are drooping due to low light, move your plant to a brighter spot. 2.

One possible solution is to water the plant with lukewarm water instead of cold water.
One possible solution is to water the plant with lukewarm water instead of cold water.

If the leaves are drooping and there are pests on the plant, treat the plant with an insecticide. Check for pests. 3.

Check for diseases. If the leaves are drooping and there are no pests on the plant, it could be due to a disease. 4. Treat the plant with a fungicide or bactericide.

Spider Mites

These pests are so small that they are often hard to spot, but they can cause your plant’s leaves to droop and turn yellow. If you think you might have spider mites, there are a few things you can do to get rid of them. Spider mites are tiny pests that can cause big problems for your rubber plant.

Just be sure to test this on a small area of your plant first to make sure it doesn’t damage the leaves. You can also try using a mixture of soap and water to create a DIY insecticide. This will kill the mites and their eggs, and it will also help to wash them away from your plant. One way to get rid of spider mites is to spray them with water.

Spider mites are tiny pests that can cause big problems for your rubber plant.
Spider mites are tiny pests that can cause big problems for your rubber plant.

This may include keeping your plant in a more humid environment, or using a different type of potting soil. Be sure to follow the directions carefully, and always test it on a small area of your plant first. Once you’ve gotten rid of the spider mites, be sure to take steps to prevent them from coming back. If you have a serious infestation of spider mites, you may need to use a chemical insecticide.

Solution

Move your plant to a spot that gets bright, indirect light and the leaves should perk up. With a little care, your rubber plant should be back to its happy, perky self in no time! If your rubber plant’s leaves are drooping, it could be due to a variety of reasons. Fertilize your plant with a balanced fertilizer and be sure to follow the directions on the package. If the leaves are still drooping, it could be a sign of a nutrient deficiency. Rubber plants are native to tropical regions and do not like to be waterlogged. The most common cause is overwatering. Rubber plants like bright, indirect light and too much direct sun can scorch their leaves. Be sure to check the soil before watering and only water when the top inch or so is dry. Another common cause of drooping leaves is too much sun.

Thrips and Aphids

If your rubber plant’s leaves are drooping, it could be a sign of an infestation of thrips or aphids. Aphids are also a problem because they can spread diseases to your plant. If you suspect that your plant has either of these pests, you should take it to a local nursery or garden center for treatment. Thrips are particularly damaging because they feed on the sap of the plant, which can cause the leaves to turn yellow and eventually drop off. These tiny pests are difficult to see with the naked eye, but they can cause serious damage to your plant.

Solution

When it comes to houseplants, one of the most common problems is drooping leaves. If your rubber plant’s leaves are drooping, it’s important to figure out the cause so you can provide the proper solution.

One of the most common reasons for drooping leaves is that the plant is not getting enough water. The solution is to water your plant deeply and regularly. When the soil is dry, the leaves will start to droop in an effort to conserve water.

One possible solution is to increase the humidity around the plant by misting the leaves daily or using a humidifier.
One possible solution is to increase the humidity around the plant by misting the leaves daily or using a humidifier.

The solution is to move your plant to a brighter location. If your plant is in a low-light location, the leaves will droop in an effort to reach for the light. Another common reason for drooping leaves is that the plant is not getting enough light.

Finally, drooping leaves can also be a sign of stress. If your plant is experiencing any type of stress, such as temperature fluctuations or drafts, the leaves will droop in an effort to protect the plant. The solution is to provide a more stable environment for your plant.

Root-Knot Nematodes

Root-knot nematodes are difficult to control, as they can quickly spread through the soil and infect other plants. If you suspect that your plants are infected with root-knot nematodes, you should consult a professional for treatment options. They are a major problem for gardeners and farmers, as they can cause extensive damage to crops. The best way to prevent root-knot nematodes is to practice good gardening hygiene, such as keeping the garden clean and free of debris. Root-knot nematodes are small, parasitic creatures that live in the soil and feed on plant roots.

Solution

Luckily, each of these problems has a solution. If your rubber plant’s leaves are drooping, it’s likely due to one of these four causes: too much sun, too little water, too much fertilizer, or pests.

The solution to rubber plant leaves drooping is to provide the plant with more light and water.
The solution to rubber plant leaves drooping is to provide the plant with more light and water.

If it’s not getting enough water, water it more frequently. Finally, if you think pests are the problem, inspect the plant carefully and treat it with an appropriate pesticide. If you think you’re over-fertilizing your plant, flush the soil with water to remove excess fertilizer. If your rubber plant is getting too much sun, move it to a spot that gets less light.

Frequently Asked Questions

1. Why are my rubber plant leaves drooping?

There are several potential causes for rubber plant leaves drooping, including insufficient light, too much water, or pests.

2. What are the signs that my rubber plant needs more light?

If your rubber plant is not getting enough light, the leaves will start to turn yellow and then droop.

3. What are the signs that my rubber plant is getting too much water?

If your rubber plant is getting too much water, the leaves will start to turn yellow and then droop.

4. What should I do if I think my rubber plant needs more light?

If you think your rubber plant needs more light, move it to a location that gets more sunlight.

5. What should I do if I think my rubber plant is getting too much water?

If you think your rubber plant is getting too much water, reduce the amount of water you are giving it.

6. What are some other potential causes of drooping leaves on my rubber plant?

Other potential causes of drooping leaves on rubber plants include pests, diseases, or temperature stress.

7. What should I do if I think my rubber plant has a pest problem?

If you think your rubber plant has a pest problem, inspect the leaves for signs of pests and then treat accordingly.

8. What should I do if I think my rubber plant has a disease?

If you think your rubber plant has a disease, inspect the leaves for signs of disease and then treat accordingly.

9. What should I do if I think my rubber plant is experiencing temperature stress?

If you think your rubber plant is experiencing temperature stress, move it to a location that has more consistent temperatures.

10. Are there any other solutions for drooping leaves on my rubber plant?

If you have tried all of the above solutions and your rubber plant leaves are still drooping, you may need to repot the plant.

Final thoughts

There are a few reasons why your rubber plant’s leaves might be drooping. The most common reason is that the plant is not getting enough water. Make sure to water your rubber plant regularly and check the soil to see if it is dry before watering. Another reason might be that the plant is not getting enough light. Move your plant to a spot where it can get more light. Finally, the temperature might be too cold for your plant. Move it to a warmer spot in your home.